Intex Comfort Plush Mid Rise Dura-Beam Airbed with Built-in Electric Pump, Bed Height 13″, Queen

$39.43 (as of January 19, 2019, 11:03 pm)

5/5 (1 Review)

Usually ships in 24 hours


The Comfort Plush Queen Airbed is part of the Dura-Beam series of airbeds that are providing amazing durability for years of lasting comfort. The name of the game is in the Fiber-Tech beam construction, which is comprised of thousands of high-strength polyester fibers that provide enhanced comfort, stability and beef up. Each bed is covered in plush flocking that is soft to the touch, and the horizontal air chambers provide added stability and beef up around the entire bed. The mattress is also equipped with a quality-tested, 20.8-gauge waterproof flocked top with 15-gauge vinyl beams and 16-gauge sides and bottom for durability. And best of all, the Comfort Plush mattress is remarkably easy to inflate thanks to the built-in, high-powered electric pump, which does its job in a mere 3-1/2 minutes. No more fussing with tiring hand or foot pumps or rummaging through the garage for your detached electric pump. And should the mattress feel a little too soft or firm, you’ll be able to customize the comfort level with the touch of a button. The Comfort Plush is raised 13 inches from the floor, making it far taller than most inflatable mattresses. And at 60 by 13 by 80 inches (W x H x L), the mattress is an official queen size, making it a good fit for fitted sheets. The Comfort Plush Queen bed–which offers a capacity of 600 pounds–is a terrific choice whether you’re sleeping at the in-law’s overcrowded house or setting up a guest bed in the basement. The mattress comes with an AC power cord and a duffel bag (for storage). Regarding Inflation: Measurements will vary based on the manner in which it is inflated and packaging disclaims “approximate size”. Airbeds are measured from the widest point including the beams (bulges) on the side and off the tallest point from the floor including built-in pillows if applicable. Location, temperature, and humidity will have an effect on the airbed’s firmness. Airbeds will need to be every now and then re-inflated (topped off) to maintain desired firmness when used for various days as vinyl tends to loosen up over time. If electrical power is not available then a one after the other operated pump can be connected to the keep an eye on valve for inflation: simply turn the keep an eye on dial to the inflation symbol, insert the air pump nozzle into the valve at the center of the keep an eye on dial, and inflate the airbed. the airbed inflated for 48-72 hours following the initial inflation. New airbeds have a tendency to stretch when they are first inflated which results in a loss of pressure, not air.
Inflatable Queen airbed for home use, engineered with Fiber-TechTM Construction
High-powered, built-in electric pump for hassle-free inflation and deflation, inflates mattress in approximately 3 and 1/2 minutes to the desired firmness. Fitted Sheets Tuck in Easily.
Waterproof flocked top with Dura-BeamTM technology, raised 13 inches from floor, indented sides keep your fitted sheets from slipping
Duffel bag included for easy storage and transport
Dimensions: 60 x 13 x 80 inches (W x H x L), 600-Pound capacity
The airbed should be inflated for 48-72 hours following the initial inflation

5/5 (1 Review)



EAN List

Is Adult Product

Is Autographed

Is Memorabilia

Item Dimensions





Package Quantity

Part Number

Product Group

Product Type Subcategory





UPC List